Search Results

Standard

Motorcycle Side Stand Retraction Performance Requirements

2003-05-30

HISTORICAL

J1579_200305

These requirements define minimum recommended levels of side stand retraction performance of a new side stand/motorcycle combination when tested according to the procedures of SAE J1578.

Standard

Motorcycle Side Stand Retraction Performance Requirements

1998-04-01

HISTORICAL

J1579_199804

These requirements define minimum recommended levels of side stand retraction performance of a new side stand/motorcycle combination when tested according to the procedures of SAE J1578.

Standard

CHARACTERIZING A TEST SURFACE FOR MOTORCYCLE SIDE STAND RETRACTION PERFORMANCE TESTING

1989-06-01

HISTORICAL

J1846_198906

This recommended practice is intended for use only in characterizing test surfaces used in motorcycle side stand retraction testing (SAE J1578). The equipment and procedure described in this recommended practice yields repeatable results in characterizing test surfaces in a Way found to be related to retraction performance. The test results obtained with this procedure do not necessarily correlate with measurements obtained with other friction measurement procedures which have been developed for other purposes.

Standard

Characterizing a Test Surface for Motorcycle Side Stand Retraction Performance Testing

2014-10-24

CURRENT

J1846_201410

This SAE Recommended Practice is intended for use only in characterizing test surfaces used in motorcycle side stand retraction testing (SAE J1578). The equipment and procedure described in this document yields repeatable results in characterizing test surfaces in a way found to be related to retraction performance. The test results obtained with this procedure do not necessarily correlate with measurements obtained with other friction measurement procedures which have been developed for other purposes.

Standard

Characterizing a Test Surface for Motorcycle Side Stand Retraction Performance Testing

2009-04-17

HISTORICAL

J1846_200904

This SAE Recommended Practice is intended for use only in characterizing test surfaces used in motorcycle side stand retraction testing (SAE J1578). The equipment and procedure described in this document yields repeatable results in characterizing test surfaces in a way found to be related to retraction performance. The test results obtained with this procedure do not necessarily correlate with measurements obtained with other friction measurement procedures which have been developed for other purposes.

Standard

Characterizing a Test Surface for Motorcycle Side Stand Retraction Performance Testing

1998-06-01

HISTORICAL

J1846_199806

This SAE Recommended Practice is intended for use only in characterizing test surfaces used in motorcycle side stand retraction testing (SAE J1578). The equipment and procedure described in this document yields repeatable results in characterizing test surfaces in a way found to be related to retraction performance. The test results obtained with this procedure do not necessarily correlate with measurements obtained with other friction measurement procedures which have been developed for other purposes.

Standard

Characterizing a Test Surface for Motorcycle Side Stand Retraction Performance Testing

2003-06-24

HISTORICAL

J1846_200306

This SAE Recommended Practice is intended for use only in characterizing test surfaces used in motorcycle side stand retraction testing (SAE J1578). The equipment and procedure described in this document yields repeatable results in characterizing test surfaces in a way found to be related to retraction performance. The test results obtained with this procedure do not necessarily correlate with measurements obtained with other friction measurement procedures which have been developed for other purposes.

Standard

Motorcycle Terminology

2019-09-24

CURRENT

J3133_201909

The motorcycle terminology presented herein addresses two-wheel single track vehicles, as well as motorized three wheel cycles. Although two-wheeled, single track scooters and mopeds are similar to traditional motorcycles, they have many characteristics which differentiate them from motorcycles, and while some terms will apply, this Terminology addresses motorcycles specifically, unless otherwise noted. Likewise, some three wheel cycles may have some similar design features and share components with motorcycle, the dynamics and handling of three wheel vehicles differs from two wheel, single track motorcycles.

Standard

A Dictionary of Terms for the Dynamics and Handling of Single Track Vehicles (Motorcycles, Mopeds, and Bicycles)

2000-01-13

HISTORICAL

J1451_200001

This dictionary of terms was prepared for use by those with a need to describe and understand the dynamics and handling of two-wheeled, single track vehicles. It is intended to span the gap between vehicle dynamics specialists and those with a more general interest. This report is pertinent to such areas as vehicle design and development, the description of two-wheeler properties, rider training and education, and the preparation of standards and regulations. This report was prepared by the SAE Motorcycle Committee, which solicits suggestions for improvements and additions to be considered in future revisions. Comments should be directed to SAE Headquarters.

Standard

A Dictionary of Terms for the Dynamics and Handling of Single Track Vehicles (Motorcycles, Mopeds, and Bicycles)

2007-08-16

HISTORICAL

J1451_200708

This dictionary of terms was prepared for use by those with a need to describe and understand the dynamics and handling of two-wheeled, single track vehicles. It is intended to span the gap between vehicle dynamics specialists and those with a more general interest. This report is pertinent to such areas as vehicle design and development, the description of two-wheeler properties, rider training and education, and the preparation of standards and regulations. This report was prepared by the SAE Motorcycle Committee, which solicits suggestions for improvements and additions to be considered in future revisions. Comments should be directed to SAE Headquarters.

Standard

A Dictionary of Terms for the Dynamics and Handling of Single Track Vehicles (Motorcycles, Scooters, Mopeds, and Bicycles)

2019-09-24

CURRENT

J1451_201909

Terminology within this document is limited to the dynamics and handling characteristics of single track, two-wheeled vehicles.

Standard

Top Speed Test Procedure for Electric Motorcycles

2019-12-17

WIP

J3007

This SAE Recommended Practice incorporates a track-based test procedure that produces a representative value for vehicle top speed when operating on a level paved road with a fully charged battery.

Standard

Top Speed Test Procedure for Electric Motorcycles

2014-02-21

CURRENT

J3007_201402

This SAE Recommended Practice incorporates a track-based test procedure that produces a representative value for vehicle top speed when operating on a level paved road with a fully charged battery.

Standard

MOTORCYCLE STOP LAMP SWITCH

1977-12-01

HISTORICAL

J1167_197712

This SAE Recommended Practice established test procedures and performance requirements for stop lamp switches intended for use on motorcycles.

Standard

MOTORCYCLE STOP LAMP SWITCH

1989-06-01

HISTORICAL

J1167_198906

This SAE Recommended Practice establishes test procedures and performance requirements for stop lamp switches intended for use in an AC or a DC circuit on motorcycles. In service use may impose specific conditions on the switch which can affect its functional life. Those conditions should be replicated, as necessary, during the testing described in this document to ensure the adequate functioning of the device.

Standard

MOTORCYCLE STOP LAMP SWITCH

1984-06-01

HISTORICAL

J1167_198406

This SAE Recommended Practice establishes test procedures and performance requirements for stop lamp switches intended for use in an AC or a DC circuit on motorcycles. In service use may impose specific conditions on the switch which can affect its functional life. Those conditions should be replicated, as necessary, during the testing described in this document to ensure the adequate functioning of the device.

Standard

MOTORCYCLE AND MOTOR DRIVEN CYCLE TURN SIGNAL LAMPS

1969-10-01

HISTORICAL

J131_196910

Standard

MOTORCYCLE TURN SIGNAL LAMPS

1983-03-01

HISTORICAL

J131_198303

This Engineering Design Specification provides design parameters and general requirements for motorcycle turn signal lamps. It does not apply to mopeds.

Standard

Motorcycle Turn Signal Lamps

1997-10-01

HISTORICAL

J131_199710

This SAE Standard provides design parameters and general requirements for motorcycle turn signal lamps. It does not apply to mopeds.

Standard

Motorcycle Turn Signal Lamps

2003-06-24

HISTORICAL

J131_200306

This SAE Standard provides design parameters and general requirements for motorcycle turn signal lamps. It does not apply to mopeds.